FOR STEEL AND CAST STEEL
SHAPE: SA
Featuring an innovative G-type file tooth structure, this carbide rotary burr significantly enhances sharpness and guidance, ensuring safe and precise operation. Its extremely high cutting performance enables the rotary file with the new-type tooth structure to achieve time-saving and highly cost-effective results.
Processing Advantages: Cutting performance on steel and cast steel is 30%–50% higher than that of traditional cross-cut file teeth. The improved tooth geometry significantly enhances edge sharpness, enabling large chip formation and superior cutting efficiency with lower thermal load, protecting both the workpieces and tools from damage.
Sample
GC61020-6 G=High Speed C=Exterior Code 6=Shank Diameter 10=Cutting Edge Diameter 20=Cutting Edge Length 6=Tool Path
| 6mm shank | Dimensions-All in mm |
Type Solid Brazed |
Part Numbers | |||||
| D1 | D2 | L1 | L2 | Cut 2 | Cut 6 | Cut 3 | ||
| SA5 | 12.7 | 6.0 | 70.0 | 25.0 | Brazed | GA61225 -2 | GA61225 -6 | GA61225-3 |
| SA3 | 9.6 | 6.0 | 65.0 | 19.6 | Brazed | GA61020-2 | GA61020-6 | GA61020-3 |
| SA1 | 6.0 | 6.0 | 61.0 | 16.0 | Brazed | GA60620-2 | GA60620-6 | GA60620-3 |
Recommended Operating Speeds
BMRANGE SPEED GUIDE
| Material Groups | HB* | B.S | EN | DIN | ||||
| Steel | Magnetic Soft | <120 | 230m07, 050A12 | EN1, EN2 Leadloy | RFe60 | |||
| Structural case carburising | <200 | 060A35, 080M40, 4360-50B | EN3A, 4 , 6 , 7, 8, 32 | St37-2, 16MnCr5, St50-2 | ||||
| Cast Iron | Lameller graphite | <150 | grade 150, grade 400 | Grey cast iron soft | GG10, GG40 | |||
| Nodular graphite, malleable | <200 | 420/12, P440/7, 700/2, 30g/72 | S.G. iron Mehanite | GGG40, GGG70, GGTS45 | ||||
| Brass, Copper, Bronze |
Unalloyed | <100 | C101 | Commercially Pure | E-Cu57, SE-Cu | |||
| β-Brass, Bronze | <200 | CZ120, CZ109, PB104 | 2.1030, 2.1080 | CuZn39Pb2, CuZn40 | ||||
| γ-Brass | <200 | CZ108, CZ106 | CuZn37, CuZn28 | |||||
| Head Diameter | 1/4" | 5/16" | 3/8" | 1/2" | ||||
| Max. RPM | 65000 | 60000 | 55000 | 35000 | ||||
| Steel | 35,000-45,000 | 30,000-40,000 | 22,500-35,000 | 20,500-30,000 | ||||
| Cast Iron | 22,500-45,000 | 20,000-40,000 | 15,000-35,000 | 11,000-30,000 | ||||
| Brass, Copper, Bronze | 22,500-45,000 | 20,000-40,000 | 15,000-35,000 | 11,000-30,000 | ||||
Recommended speed are based on the standard shank length of 1-3/4" max overhang of 3/8"
Maximum recommended speeds for extended length shanks is 15,000rpm
Get In Touch
Our team works with you during every phase of the project
