FOR ALUMINUM AND NON-FERROUS METAL
SHAPE: SC
The newly developed wide-spaced Y-type tooth structure enables exceptional cutting performance, while the large chip flutes reduce material adhesion.
It features a long service life and smooth operation, with a cutting speed of up to 800–1000 M/min. It is widely suitable for rough machining of non-ferrous metals, brass, copper, plastics, and fiber-reinforced materials.
Sample
GC61020-6 G=High Speed C=Exterior Code 6=Shank Diameter 10=Cutting Edge Diameter 20=Cutting Edge Length 6=Tool Path
| 6mm shank | Dimensions-All in mm | Type Solid Brazed |
Part Numbers | |||||
| D1 | D2 | L1 | L2 | Cut 2 | Cut 6 | Cut 3 | ||
| SC5 | 12.7 | 6.0 | 70.0 | 25.0 | Brazed | GC61225-2 | GC61225-6 | GC61225-3 |
| SC3 | 8.0 | 6.0 | 65.0 | 19.6 | Brazed | GC61020-2 | GC61020-6 | GC61020-3 |
| SC1 | 6.0 | 6.0 | 61.0 | 16.0 | Brazed | GC60620-2 | GC60620-6 | GC60620-3 |
Recommended Operating Speeds
BMRANGE SPEED GUIDE
| Material Groups | HB* | B.S | EN | DIN | ||||
| Steel | Magnetic Soft | <120 | 230m07, 050A12 | EN1, EN2 Leadloy | RFe60 | |||
| Structural case carburising | <200 | 060A35, 080M40, 4360-50B | EN3A, 4, 6, 7, 8, 32 | St37-2, 16MnCr5, St50-2 | ||||
| Cast Iron | Lameller graphite | <150 | grade 150, grade 400 | Grey cast iron soft | GG10, GG40 | |||
| Nodular graphite, malleable | <200 | 420/12, P440/7, 700/2, 30g/72 | S.G. iron Mehanite | GGG40, GGG70, GGTS45 | ||||
| Brass, Copper, Bronze |
Unalloyed | <100 | C101 | Commercially Pure | E-Cu57, SE-Cu | |||
| β-Brass, Bronze | <200 | CZ120, CZ109, PB104 | 2.1030, 2.1080 | CuZn39Pb2, CuZn40 | ||||
| γ-Brass | <200 | CZ108, CZ106 | CuZn37, CuZn28 | |||||
| Head Diameter | 1/4" | 5/16" | 3/8" | 1/2" | ||||
| Max. RPM | 65000 | 60000 | 55000 | 35000 | ||||
| Steel | 35,000-45,000 | 30,000-40,000 | 22,500-35,000 | 20,500-30,000 | ||||
| Cast Iron | 22,500-45,000 | 20,000-40,000 | 15,000-35,000 | 11,000-30,000 | ||||
| Brass, Copper, Bronze | 22,500-45,000 | 20,000-40,000 | 15,000-35,000 | 11,000-30,000 | ||||
Recommended speed are based on the standard shank length of 1-3/4" max overhang of 3/8"
Maximum recommended speeds for extended length shanks is 15,000rpm
| Material Groups | Application | Cutting Speed(For Alu) | ||||||
| Non-ferrous metals | Soft non-ferrous metals | Aluminum alloy | Rough machining | 600-1.100mm/min | ||||
| Finish machining | 900-1.100mm/min | |||||||
| Brass、Copper、Zinc | Rough machining | 600-1.100mm/min | ||||||
| Finish machining | 900-1.100mm/min | |||||||
| Hard non-ferrous metals | High-silicon hard aluminum alloy | Rough machining | 600-1.100mm/min | |||||
| Finish machining | 900-1.100mm/min | |||||||
| Titanium/Ti alloy | Rough machining | 450-1.100mm/min | ||||||
| Finish machining | 600-1.100mm/min | |||||||
| Bronze | Rough machining | 600-1.100mm/min | ||||||
| Finish machining | 600-1.100mm/min | |||||||
| Plastics and other | Fiber-reinforced plastic(FRP/CRP)、Thermoplastic | Rough machining | 600-1.100mm/min | |||||
| materials | Finish machining | 600-1.100mm/min | ||||||
Get In Touch
Our team works with you during every phase of the project
